G&Z Bucket Wheel Trencher 6500

PIPELINE & UTILITY TRENCHER

Model 6500

Max. Depth 1,8m
Max. Width 760mm

G&Z 6500 Pipeline & Utility Trencher

Eagle 6500 Bucket Wheel Trencher for Pipeline and Utilities Trenching. High Production Bucketwheel Trencher 1.8m Maximum Digging Depth. G&Z is committed to producing high production, low maintenance trenchers. Eagle Trenchers are the most cost effective way to increase the profitability of your job. The Eagle 6500 is an excellent choice for a pipeline and utilities trenching in friable soils.

Characteristics Eagle 6500 Bucketwheeltrencher:

Model	Capacity	Transmission	Main Application
Eagle 6500	Max. Depth 1,8m Max. Width 760mm Min. Width 455mm	175 HP (130 kW)	Pipeline Trenching Utility Trenching

Video G&Z Bucketwheeltrencher 6500

Main Characteristics:

Hydraulically Retractable Crumb Shoe
Dual Wheel Lift Cylinders and Dual Tilt Cylinders located on Boom Frame
Undercarriages bolt connected to Trencher Body
Bridge Type Boom Frame for up to 30" (762mm) buckets
Hydraulic Conveyor Shift Mechanism
Enclosed stay rod and lower digging wheel
Wheel Rock Guard
Roll Over Protection System (ROPS)

Popular Options:

Cross Slope Control – Auto Leveling
Round conical carbide teeth with pocket
Narrow Bucket Wheel Kit to maintain full depth 18" (457mm) trench width

Eagle 6500 Specifications:

Engine: CAT C7/ACERT, Tier 3 compliant, turbocharged, ATAAC, water-cooled diesel engine
Engine H.P.: 175 HP (130 kW) @ 2100 RPM, Continuous Rating (“A” rating)
Fuel Capacity: 120 Gal. (454 L) published consumption 12.3 gph (46.3 L/hr)
Cooling: Special combination engine radiator, heat exchanger, intercooler mounted in front of the engine with pusher fan
Digging Depth: 72" (1829mm)
Digging Width: 24" (620mm) to 30" (762mm). Optional 18" (457mm) width available.
Buckets: 14 each, 1" (25.4mm) Mild Steel, welded, crown style
Teeth: Hensley X156L with roll pin with pocket
Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24" (610mm) wide x approximately 7' (2134mm) long center to center with belt skirting rated @ 1000 fpm (305 M/min)
Undercarriage: D-4 size Crawlers, 6 bottom rollers, 1 top carrier roller, Salt Chain with Split Master Link, Rock Guards, spring loaded, grease gun type front idler assemblies. 16" (400mm) wide triple grousers.
Undercarriage Drive: Planetary gear reduction boxes with in the planetary hydrostatic bent axis, two speed motors with independent speed control by electronic hand levers. Planetaries equipped with parking brake.
Speed Range : Working Speed 0 – 30 fpm (0 – 9.14 Mpm), Travel Speed 0 – 200 fpm (0 – 61 Mpm)
Approximate Weight: Approximately 34,000 lbs (15,385 kg)

Inquiries on G&Z Bucket-Wheel-Trenchers:

If you have any queries to Power Curber products or wish a quote, please contact us under: » info@hedke.com / Tel: +49 (0)89 60 99 007

» G&Z Bucketwheeltrenchers 4600 with side shift:
» G&Z Bucketwheel Trench 6600 with side shift

» Printable Version

Products:

Trenchers:

Common: